control systems
MICROMOTE
Type of transmitter Applications Functions
Features
MICROMOTE For 1 bridge with kit – Lifting: 2 speeds – 9 controls
(1 cable or chain hoist, – travelling: 2 speeds – 2 speeds
1 receiver and – Crossing: 2 speeds for all movements
1 transmitter or hoist alone) – “Push” stop
– Start button
– Horn contact
Description of the MICROMOTE radio control system:
- 1 Ergonomic transmitter
- 1 Transport strap
- 1 Receiver on the hoist or on the crane kit
- 2 Batteries
- User guide- terminal diagram
- 1 Directional sticker
- 1 Horn built into the receiver
Transmitter
Transmission power 10 mW
NiMH battery power feed 4 x 1.5 V / 1600 mAh / type AA
Approximate operating time 10 / 5 h (50 / 100 % ED)
Operating temperature -30 ºC… +75 ºC
Protection class IP 65
Harmonic 65 dB
Modulation 2.5 kHz
Receiver
RF sensitivity -110 dBm
Output command 250 V / 10 A relay
Number of addresses 12
Operating voltage and frequencies 48 / 115 / 230 V AC +/- 10% o 50 / 60 Hz +/- 5%
Casing Plastic
Protection class IP 65
Radio control systems: your solution for higher productivity and safety
HBC RADIO SYSTEMS
10 two-step HBC push buttons plus rotary switch (inactive if
not ordered) / STOP impact switch.
• LED for indication of operating / battery status.
• 2 rechargeable NiMH exchange batteries, approx. 30 hours of
continuous operating time (standard version).
• Robust plastic housing, protection class IP 65.
• Weight: 550 g (1.2 lbs.) including battery + rubber shock
absorber.
• Manual frequency switch.
• Further options: DECT, radiomatic® AFS (Automatic Frequency
Selection), catch-release, tandem operation, radiomatic®
infrakey, radiomatic® shock-off / roll-detect / zero-g, use
in the Multi-Receiver-Concept (MRC), preselection of
trolley / hoist, customized labeling by laser.
